tankvolumecalc.com
Home / Tank sizes / 600 gallon
600 gallons · by capacity

600 gallon tank: dimensions that work

600 gal = 2,271 L = 80.2 ft³. Full weight ≈ 5,007 lb of water. Below: every diameter/length pair that holds exactly this — geometry, not brand specs, so you can sanity-check any manufacturer sheet.

Have a tank in mind? Check it in the horizontal tank volume calculator or the vertical tank volume calculator — total capacity and gallons at any fill depth.

Horizontal cylinder: length required for 600 gal
DiameterLength
24 in dia306 in (25.5 ft)
30 in dia196 in (16.3 ft)
36 in dia136 in (11.3 ft)
38 in dia122 in (10.2 ft)
42 in dia100 in (8.3 ft)
48 in dia77 in (6.4 ft)
Vertical cylinder: height required for 600 gal
DiameterHeight
36 in dia136 in tall
38 in dia122 in tall
42 in dia100 in tall
48 in dia77 in tall

What 600 gallons is, in every unit that matters

Exact conversions
600 US gal = 138,600 in³ (× 231, exact) 600 US gal = 80.2 ft³ (× 77/576) 600 US gal = 2,271 L (× 3.785411784, exact) 600 US gal = 2.271 m³ (× 0.003785411784, exact)Every factor above is exact by definition — see the conversion library for the derivations.

What 600 gallons weighs

600 gallons — weight of contents
ContentsDensityWeight of contentsMetric
Water8.35 lb/gal5,007 lb2,271 kg
No. 2 heating oil7.20 lb/gal4,320 lb1,960 kg
Diesel7.05 lb/gal4,230 lb1,919 kg
Gasoline6.30 lb/gal3,780 lb1,715 kg
Kerosene6.82 lb/gal4,092 lb1,856 kg

Densities are the reference values on our methodology page; add the empty vessel weight for a gross figure.

What is the same for every tank of this kind (choosing proportions, the standards behind a capacity figure) is set out once on the sizes hub, in the tank reference and the common questions for every tank.

What D and L mean

END VIEWDrSIDE VIEWLh
D = inside diameter, and r = D ÷ 2. L = length of the shell. h = liquid depth, measured from the lowest point inside the tank.

FAQ

What are the dimensions of a 600 gallon tank?

There is no single size: any diameter and length pair in the tables above holds this volume, for example a horizontal 24 in dia 306 in or a vertical 36 in dia 136 in tall.

How much does a full 600 gallon tank weigh?

About 5,007 lb of water, or less for a hydrocarbon — the weight table above gives the figure for each liquid. Add the empty vessel weight for a gross figure.

Sources and standards

  1. Handbook 44, Appendix C — General Tables of Units of MeasurementNational Institute of Standards and Technology, U.S. Department of Commercehttps://www.nist.gov/document/2026-nist-handbook-44-appendix-c
  2. Special Publication 811, Appendix B.8 — Factors for Units Listed AlphabeticallyNational Institute of Standards and Technologyhttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b8
  3. ISO 7507-1 — Petroleum and liquid petroleum products: Calibration of vertical cylindrical tanks, Part 1: Manual strapping methodInternational Organization for StandardizationPaid standard — cited by designation; obtain from the publisher.
  4. Manual of Petroleum Measurement Standards (MPMS) — Ch. 1 “Vocabulary”, Ch. 11.1 “Temperature and Pressure Correction Factors”, Ch. 12.1 “Calculation of Static Petroleum Quantities”American Petroleum Institute (with ASTM D1250 / ISO 91 volume correction tables)Paid standard — cited by designation; obtain from the publisher.
  5. Methodology — the partial-fill formulas and liquid densities used on this sitetankvolumecalc.comhttps://tankvolumecalc.com/methodology/

Every linked source above was retrieved and checked on 2026-09-02.